Описание

Reliable Safety Solution for LED Tube Lighting

Это Светодиод emergency driver converts your standard LED tube into an emergency lighting solution during power outages. It automatically switches to battery power when the grid fails, ensuring reliable illumination with no compromise on brightness.

Особенности:

100% Full Power Emergency Output– Maintains full original brightness during blackouts, no lumen reduction, providing dependable light for emergency situations.
High-Capacity Li-Ion Battery– Built-in 11.1V 2600mAh 18650 battery pack, delivering 60–180 minutes of emergency lighting to suit various application needs
Wide Voltage Global Compatibility– Input 85-265V, output DC230V, supports 5-20W LED tubes and works with worldwide power grids.
Compact & Slim Design– Dimensions only 255×40×25mm, easily fits inside tube brackets or light fixtures for quick, space-saving installation

Specification:

Модель	FAT-LED-F1B
Входная мощность	5W to 20W(max 25W)
Номинальное напряжение	Переменный ток 85–265 В, 50/60 Гц
Изменение времени действия чрезвычайной ситуации	>2S
Выходное напряжение	DC230V
Выходная мощность в аварийном режиме	5-20W
Мощность зарядки	5 Вт
Продолжительность чрезвычайной ситуации	60-180mins
Аккумулятор Backup	11,1 В (литиевая батарея) 2600 мА·ч
Зарядный ток	300 мА
Power Factor	>0.9
Аварийный выход	Main Output 100%
Тип лампы	LED Lamp,LED Tube
Класс защиты IP	IP30
Режим работы	Аварийное освещение
Стэнdard	EN 60598-2-22

wiring diagram for LED Emergency driver:

emergency power supplyEmergency effect in case of power failure

FAT-LED-F1B wiring diagram

FAT-LED-F1B LED Emergency Driver FAQ:

Q1: Which types of LED lights are compatible with this driver?
A: The FAT-LED-F1B is specifically designed for T5 and T8 LED tubes. It is ideal for converting standard tube fixtures into emergency lighting systems.

Q2: What is the maximum load power it can handle?
A: This model supports LED tubes with a power range of 5W to 20W, and can handle a maximum input power of up to 40W.

Q3: Will the brightness of the LED tube decrease during a power outage?
A: No. This driver provides 100% full power emergency output, meaning it maintains the full original brightness of the tube during blackouts with no lumen reduction

Q4: Is the driver difficult to install in tight spaces?
A: Not at all. It features a compact and slim design (255×40×25mm), allowing it to easily fit inside tube brackets or light fixtures.

Q5: Is the battery protected from damage?
A: Yes, the circuitry includes overcharge protection to ensure the safety and long lifespan of the lithium battery.

Технические характеристики

Модель	FAT-LED-F1B
Входная мощность	5W to 20W(max 25W)
Номинальное напряжение	AC 85–265 В
Изменение времени действия чрезвычайной ситуации	>2S
Выходное напряжение	DC230V
Выходная мощность в аварийном режиме	5-20W
Мощность зарядки	5 Вт
Продолжительность чрезвычайной ситуации	60-180mins
Аккумулятор Backup	11,1 В (литиевая батарея) 2600 мА·ч
Зарядный ток	300 мА
Power Factor	>0.9
Аварийный выход	Main Output 100%
Тип лампы	LED Lamps,LED Tubes
Класс защиты IP	IP30
Тип чрезвычайной ситуации	С обслуживанием / Без обслуживания
Стэнdard	EN 60598-2-22

Часто задаваемые вопросы

Q2: What is the maximum load power it can handle?
A: This model supports LED tubes with a power range of 5W to 20W, and can handle a maximum input power of up to 40W.

Q4: Is the driver difficult to install in tight spaces?
A: Not at all. It features a compact and slim design (255×40×25mm), allowing it to easily fit inside tube brackets or light fixtures.

Q5: Is the battery protected from damage?
A: Yes, the circuitry includes overcharge protection to ensure the safety and long lifespan of the lithium battery.