Fita LED flexível Ra85 High-Bright 2835 | 120/180/240 LEDs/m | PCB de 8 mm, 10 mm e 12 mm | 12 V CC/24 V CC

Descrição

High-Bright 2835 Premium Series: Seamless Linear Lighting & Enhanced Color Fidelity

When executing modern interior coves, retail cabinetry, or bespoke linear fixtures, grainy light dots and washed-out colors are a thing of the past. Our High-Bright 2835 LED Strip Series is engineered with a thick 18/50 copper PCB layout and Ra≈85 color rendering chips. This provides an exceptional balance of superior lumen output, thermal management, and cost-efficiency—making it the preferred choice for electrical contractors, designers, and premium brand wholesalers worldwide.

Principais características:

• Vibrant Color Fidelity (CRI Ra≈85):Delivers upgraded color precision that brings out the deep textures of wood grain, architectural fabrics, and interior finishes, far outperforming standard Ra70 economical strips.
• High-Density, Dot-Free Output: With high-density layouts available up to 240 LEDs per meter, this series provides an incredibly smooth, fluid neon-like emission when enclosed in shallow aluminum diffusers, erasing dark gaps entirely.
• Thick 18/50 Premium PCB Framework: Built on a heavy-duty 18/50 pure copper substrate, which lowers resistance, significantly reduces voltage drops across longer runs, and pulls heat away from the chips to preserve uniform brightness.
• Massive Lumen Output (Up to 2300 Lm/M): Equipped with high-efficacy, gold-wire 2835 SMD packages, the flagship 12mm variant pumps out an intense 2300 lumens per meter, functioning perfectly as a primary ambient light source.
• Genuine Blue 3M Adhesive:Outfitted with industrial-grade Blue 3M thermal adhesive tape, ensuring a strong, permanent bond inside drop ceilings, millwork channels, and metal surfaces without ungluing over time.
• Complete Environmental Adaptability: Easily customized to match your exact job site requirements, with options spanning from IP20 (Indoor Open Circuit) to IP68 (Fully Encapsulated Outdoor/Submersible Substrate).

Especificações técnicas:

Ra85 High-Bright 2835 Flexible LED Strip Light FAQ:

Q1: Which variant is recommended for a primary light source without using other main room fixtures?
R: If you are designing a space where the LED strip serves as the primary illumination source (such as direct linear office light bars or handle-less cove main ceiling designs), we highly recommend the 12mm PCB with 240 LEDs/m. At 18.5W/m, it blasts out a powerful 2300 lumens per meter. Its 12mm extra-wide layout ensures the intense heat generated by high-wattage operation is spread out over a wider trace area, preserving the phosphor layer and chip integrity over its long lifespan.

Q2: What is the exact purpose of the 18/50 PCB framework rating?
R: O 18/50 rating indicates a precise copper layer thickness and layout ratio on the flexible circuit board. High-density strips (like 180 or 240 LEDs/m) pull more current. Standard cheap PCBs use thin copper layers which cause severe voltage drop—meaning the beginning of your 5m or 10m roll is bright while the end looks dim and warm. Our 18/50 pure copper tracking entirely eliminates this issue, supplying uniform voltage and brightness across the entire installation run.

Q3: Can these high-density strips be cut easily on-site?
R: Yes! Even with the LEDs packed closely together, clear scissor-mark cutting lines are etched onto the surface copper. The 12V models cut every 3 LEDs, while the 24V models cut every 6 LEDs. This allows installers to neatly tailor the ribbon to custom millwork dimensions right on the construction site with zero layout waste.