Full Power 10-50W LED Emergency Driver HM-EMK02-F50W | High Voltage Output DC220-240V | 2-Hour 14.8V Li-ion Backup Kit

Descrição

The HM-EMK02-F50W Full Power LED Emergency Driver System ensures uninterrupted, maximum-brightness emergency illumination for industrial and commercial environments during sudden power outages. Designed to drive 10W–50W LED fixtures at 100% full lumen output, this system replaces standard reduced-power emergency kits by maintaining complete operational visibility when main power fails.

Key Features:

• 100% Full Power Emergency Output:Unlike reduced-power emergency drivers, model HM-EMK02-F50W powers connected 10W–50W fixtures at full operational lumens during blackouts.
• High-Capacity 14.8V Li-ion Battery Pack:Available with 5200mAh and 7800mAh configurations to supply up to 2 continuous hours of full-load 50W backup time.
• High Output Voltage (DC 220-240V):Designed specifically for high-voltage LED arrays, floodlights, and integrated driver fixtures.
• Industrial-Grade Metal Housing:Heavy-duty casing measuring 200/290 × 75 × 42 mm for efficient thermal dissipation in demanding industrial conditions.
• Intelligent IC Circuit Protection:Built-in automatic safeguards against over-charging, over-discharging, output short circuits, and power surges.

Especificações técnicas: 

Application Wiring Diagrams：

FAQ: Full Power LED Emergency Driver (HM-EMK02-F50W)

Q1: What does “Full Power Output” mean for the HM-EMK02-F50W?

R: Unlike standard emergency drivers that reduce the fixture’s brightness to 10%–20% (reduced wattage) during power outages, the HM-EMK02-F50W maintains 100% full brightness (up to 50W) during an emergency. This guarantees maximum illumination for critical industrial, commercial, and high-visibility areas.

Q2: How long can the HM-EMK02-F50W run a 50W LED fixture during a power outage?

R: Equipped with a high-capacity 14.8V Li-ion battery (5200mAh / 7800mAh), it delivers a minimum of 120 minutes (2 hours) of continuous, full-brightness emergency operation at the maximum 50W load.

Q3: Which types of LED luminaires are compatible with model HM-EMK02-F50W?

R: It is specially engineered with a DC 220-240V high-voltage output to support a wide range of 10W to 50W high-output LED fixtures, including:

• Outdoor & Indoor LED Flood Lights
• LED Tri-proof Lights & Vapor Tights
• T8 / T5 LED Tubes & Linear Lights
• High Bay & Low Bay Fixtures