Descrizione

Reliable Safety Solution for LED Tube Lighting

Questo LED emergency driver converts your standard LED tube into an emergency lighting solution during power outages. It automatically switches to battery power when the grid fails, ensuring reliable illumination with no compromise on brightness.

Features:

100% Full Power Emergency Output– Maintains full original brightness during blackouts, no lumen reduction, providing dependable light for emergency situations.
High-Capacity Li-Ion Battery– Built-in 11.1V 2600mAh 18650 battery pack, delivering 60–180 minutes of emergency lighting to suit various application needs
Wide Voltage Global Compatibility– Input 85-265V, output DC230V, supports 5-20W LED tubes and works with worldwide power grids.
Compact & Slim Design– Dimensions only 255×40×25mm, easily fits inside tube brackets or light fixtures for quick, space-saving installation

Specification:

Modello	FAT-LED-F1B
Potenza in ingresso	5W to 20W(max 25W)
Tensione nominale	CA 85-265 V, 50/60 Hz
Modifica dell'orario di emergenza	>2S
Tensione di uscita	DC230V
Potenza in uscita in caso di emergenza	5-20W
Potenza di ricarica	5 W
Durata dell'emergenza	60-180mins
Batteria Backup	11,1 V (batteria al litio) 2600 mAh
Corrente di carica	300 mA
Power Factor	>0.9
Uscita di emergenza	Main Output 100%
Tipo di lampada	LED Lamp,LED Tube
Grado IP	IP30
Modalità di funzionamento	Illuminazione+di emergenza
Standard	EN 60598-2-22

wiring diagram for LED Emergency driver:

emergency power supplyEmergency effect in case of power failure

FAT-LED-F1B wiring diagram

FAT-LED-F1B LED Emergency Driver FAQ:

Q1: Which types of LED lights are compatible with this driver?
A: The FAT-LED-F1B is specifically designed for T5 and T8 LED tubes. It is ideal for converting standard tube fixtures into emergency lighting systems.

Q2: What is the maximum load power it can handle?
A: This model supports LED tubes with a power range of 5W to 20W, and can handle a maximum input power of up to 40W.

Q3: Will the brightness of the LED tube decrease during a power outage?
A: No. This driver provides 100% full power emergency output, meaning it maintains the full original brightness of the tube during blackouts with no lumen reduction

Q4: Is the driver difficult to install in tight spaces?
A: Not at all. It features a compact and slim design (255×40×25mm), allowing it to easily fit inside tube brackets or light fixtures.

Q5: Is the battery protected from damage?
A: Yes, the circuitry includes overcharge protection to ensure the safety and long lifespan of the lithium battery.

Specifiche tecniche

Modello	FAT-LED-F1B
Potenza in ingresso	5W to 20W(max 25W)
Tensione nominale	AC 85-265 V
Modifica dell'orario di emergenza	>2S
Tensione di uscita	DC230V
Potenza in uscita in caso di emergenza	5-20W
Potenza di ricarica	5 W
Durata dell'emergenza	60-180mins
Batteria Backup	11,1 V (batteria al litio) 2600 mAh
Corrente di carica	300 mA
Power Factor	>0.9
Uscita di emergenza	Main Output 100%
Tipo di lampada	LED Lamps,LED Tubes
Grado IP	IP30
Tipo di emergenza	Con manutenzione / Senza manutenzione
Standard	EN 60598-2-22

Domande frequenti

Q2: What is the maximum load power it can handle?
A: This model supports LED tubes with a power range of 5W to 20W, and can handle a maximum input power of up to 40W.

Q4: Is the driver difficult to install in tight spaces?
A: Not at all. It features a compact and slim design (255×40×25mm), allowing it to easily fit inside tube brackets or light fixtures.

Q5: Is the battery protected from damage?
A: Yes, the circuitry includes overcharge protection to ensure the safety and long lifespan of the lithium battery.