IP65 Waterproof LED Highbay Emergency Power Kit HM-EMK03-P15W | 100-300W UFO Highbay Backup Driver | 15W 180 Mins | LiFePO4 12.8V 4000mAh

Descripción

Engineered Specifically for Industrial Highbay Safety Compliance

High-ceiling facilities such as warehouses, manufacturing plants, logistics hubs, and indoor sports arenas require reliable emergency illumination to comply with life-safety egress codes. The HM-EMK03-P15W provides a rugged, field-installable emergency conversion system tailored specifically for 100W, 150W, 200W, 240W, and 300W UFO highbay lights.

Tool-Free Ring-Hook Mount & Simplified In-Line Wiring

Designed with heavy-duty top and bottom threaded suspension hooks, the kit mounts directly between the facility ceiling hook and the highbay fixture. The simplified wiring terminal architecture routes incoming AC mains (Unswitched L, Switched SL, Neutral N, Ground) into the emergency unit, while output leads connect straight to the highbay driver and LED module using waterproof strain-relief glands.

Long-Life LiFePO4 Battery & High-Voltage DC Output

Equipped with an industrial-grade LiFePO4 12.8V 4000mAh battery, this driver offers superior thermal endurance in high-ambient ceiling environments compared to standard lithium-ion or lead-acid packs. Its auto-adjusting DC 100-240V output delivers a steady 15W emergency beam for 3 full hours (180 minutes) during blackouts.

Key Features:

• Fit for 100-300W Highbays: Ideal for Warehouses & Factories
• IP65 Waterproof: Fully Sealed Heavy-Duty Enclosure
• LiFePO4 12.8V Tech: 180-Min Emergency Backup Duration
• In-Line Hook Mount:Simplified Highbay Suspension Wiring
• 3-Year Warranty: CE & RoHS Compliant

Especificaciones técnicas: 

Application Wiring Diagrams：

Q1: How does the ring-hook installation work with existing highbay fixtures?

R: The HM-EMK03-P15W features top and bottom heavy-duty eyebolts. The top hook attaches to your facility’s ceiling chain or hook, while the bottom hook holds the UFO highbay. This in-line suspension eliminates the need to drill mounting holes or install separate wall junction boxes.

Q2: Will 15W emergency power provide enough light from a high ceiling?

R: Yes. Modern LED highbays operate at high efficacy (140–180 lm/W). At 15W emergency output, a highbay produces approximately 2,100 to 2,700 emergency lumens—more than sufficient to illuminate evacuation paths and meet OSHA/NFPA emergency lighting requirements from 15-to-30-foot mounting heights.

Q3: How does the wiring setup connect to the highbay and AC mains?

1. R:As shown in the wiring diagram:
2. AC Input:Connect Unswitched Live (L), Switched Live (SL), Neutral (N), and Ground to the incoming power supply.
3. Driver Connections:Connect the emergency kit’s driver output terminals directly to the highbay’s internal AC input and LED load lines.

The internal transfer switch automatically switches the highbay from normal AC mains to 15W battery power within milliseconds of a blackout.

Q4: Is the IP65 rating suitable for harsh industrial environments?

R: Absolutely. The IP65 sealed housing and waterproof M12 cable glands protect all internal electronics and the LiFePO4 battery pack against dust, humidity, airborne oils, and water washdowns in industrial facilities.